Connect Wired Ethernet Adapter to an Echo Show 5 Using an OTG Cable (2023)

The Echo Show 5 is a well-known smart display from Amazon that offers users access to Alexa as well as a number of services like video calling and music streaming. The device typically connects to the internet via Wi-Fi, but an Ethernet adapter can also be used to connect it to a wired network. This is especially helpful if your Wi-Fi signal is spotty or you wish to stay clear of wireless interference.

An OTG (On-The-Go) cable that works with an Echo Show 5 is required to connect an Ethernet adapter to the gadget. An Ethernet adapter that works with an OTG connection is also required. You can connect the adapter to your Echo Show 5 by following the instructions below once you have these things.

Step 1: Verify the OTG Cable and Ethernet Adapter's compatibility.

Make sure they are compatible with your Echo Show 5 device before you buy an OTG cable and Ethernet adapter. To confirm that they will function with your device, you can look at the product details.

Step 2: Attach the OTG cable to the Echo Show 5.

Attach the OTG cable's one end to the Echo Show 5's micro-USB connector. The Ethernet adapter should be connected to the other end of the cable, which should be a typical USB-A port.

Step 3: Attach the OTG Cable to the Network Adapter.

Attach the OTG cable's USB-A connector to the Ethernet adapter. Verify that the adapter is powered and that the OTG cable is compatible with it.

Step 4: Configuring the CAT-5 Connection

After you have connected the Ethernet adapter to the Echo Show 5, configure the device so as to use the new network connection. Simply follow these steps:

Swipe down the top of the screen to get to the device settings.

Tap on the "Settings" icon.

Tap on "Network & Internet".

Tap on "Wi-Fi".

Turn off Wi-Fi by tapping the switch next to "Wi-Fi".

Tap on "Ethernet".

Continue to follow the prompts for your Ethernet connection.

Step 5: Testing the Connection

After you have configured the Ethernet connection, you should test it to see if it is working correctly. You can do this by opening up an app like Netflix on the device and open the app

Conclusion

Connecting an Ethernet adapter to an Echo Show 5 using an OTG cable is a straightforward process that can provide you with a more stable and reliable internet connection. By following the steps outlined above, you can easily set up your Echo Show 5 to use an Ethernet connection and enjoy the benefits of a wired network connection.

Research: Lorin Roberts