HP SitePrint has been recognized by BuiltWorlds as one of their Robotics Top 50 List for the second consecutive year (2024 & 2025).
HP SitePrint has been awarded, by the Innovative Product Awards (IPAs), as one of the 2023 Expert’s Choice for disruptive innovations.
Footnotes and disclaimers
Layout accuracy tolerance of ±3/32 in (±2 mm) and floor level accuracy tolerance of ±1/32 in (±0.8 mm) on average, when operating at distances between 15.4 ft and 98.4 ft (5 m and 30 m), using a high-accuracy setup with the HP SitePrint SMR Prism, High Accuracy Print Mode, and a 1″ Total Station (tested with Leica TS16/60 1″, Topcon GT1201 1″, and Trimble S9 1″).
Productivity improvements of up to 30% are based on comparisons with the performance of the previous software version, VP2.0. These results were obtained from internal tests, where SitePrint printed CAD files under average conditions representative of real user plots across various applications. Actual productivity gains may vary depending on specific customer applications and the unique characteristics of each job. For MEP use case CAD files, the productivity increase exceeds 30%, while for interior wall layouts, the increase is 8%.